Posts Tagged ‘pxe boot’

Deploying server 2008 and Windows 7 using Windows Deployment Services.

Windows Server 2008 comes equipped with a service to automate the installation of Operating systems using a DHCP PXE boot.
The example will Use server2008 as the Windows Deployment Server.
The Serverwill have a DHCP server installed and a DHCP scope of

10.10.10.1 - 20.

The IP address of the WDS is

10.10.10.100

The server is part of the domain failover.lab

Configure your DHCP server with a scope of your choice.
Install Windows Deployment Services Role.

Read the rest of this entry »

Tags: router, interface, switch, cisco, vlan, wan