Posts Tagged ‘port’
June 23rd, 2008 | 
Author: Bitmindframes study guides
What is VTP?
VLAN Trunking Protocol (VTP) is a Cisco proprietary Layer 2 messaging protocol that manages the addition, deletion, and renaming of VLANs on a network-wide basis. Virtual Local Area Network (VLAN) Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN is distributed through all switches in the domain. This reduces the need to configure the same VLAN everywhere. To do this VTP carries VLAN information to all the switches in a VTP domain. VTP advertisements can be sent over ISL, 802.1q, IEEE 802.10 and LANE trunks. VTP traffic is sent over the management VLAN (VLAN1), so all VLAN trunks must be configured to pass VLAN1. VTP is available on most of the Cisco Catalyst Family products.
Configuring port security
A switch without port security allows attackers to connect to unused, ports and gather info or attack the network. All ports should be secured before a switch is deployed. Port security limits the number of MAC addresses allowed on port.
If you limit the number to 1 & assign a single MAC address only the pc attached is allowed to connect via that port, when that number is reached a security violation occurs.